Comprehensive Guide to Using Richmat HJH159 BLE Wireless Remote Control

In today’s world, comfort and convenience have become paramount, especially when it comes to home furniture like adjustable beds. The Richmat HJH159 BLE Wireless Remote Control is a state-of-the-art device designed to provide users with seamless control over their adjustable beds via Bluetooth technology. Its intuitive design, wide range of functions, and user-friendly interface make it an excellent choice for enhancing your relaxation and sleep experience.

This comprehensive guide will walk you through everything you need to know about the Richmat HJH159 BLE remote—from setup and pairing to programming, operating advanced features, and troubleshooting common issues. Richmat HJH159 BLE Manual

What is the Richmat HJH159 BLE Wireless Remote?

The Richmat HJH159 BLE is a wireless remote controller that uses Bluetooth Low Energy (BLE) to communicate with the control box of an adjustable bed. This remote allows users to adjust multiple sections of the bed, including head, foot, lumbar, and tilt functions. Beyond simple adjustments, it supports massage functions with multiple modes and intensities, memory presets, and lock functions for safety.

Its Bluetooth capability ensures reliable, interference-free communication with the bed’s motor system, eliminating the need for cumbersome wires and increasing ease of use.

Getting Started: Setting Up and Pairing Your Remote

1. Clearing Previous Pairings

Before pairing your Richmat HJH159 BLE remote with a new control box, it’s essential to clear any previous pairing memories stored on the remote:

Press and hold the Back Up and Foot Down buttons simultaneously for about 5 seconds.
You’ll see the flashlight turn on, signaling that the pairing information has been successfully cleared.

2. Entering Pairing Mode on the Control Box

Locate the control box under your adjustable bed.
Press and hold its pairing button until you hear a beep or see an LED indicator flash, which indicates that it has entered pairing mode.
This mode typically lasts for 60 seconds, during which you can pair the remote.

3. Pairing the Remote Control

On the remote, press and hold the Back Up and Foot Up buttons simultaneously.
The flashlight will blink, and you’ll hear a buzzer confirming that the remote and control box are successfully paired.
If the remote doesn’t respond, try waking it up by pressing any button, then repeat the pairing process.

Navigating the Controls: Manual Bed Adjustments

The Richmat HJH159 BLE remote offers comprehensive manual control for bed adjustments:

Head Section: Use the Head Up and Head Down buttons to raise or lower the headrest.
Foot Section: Use the Foot Up and Foot Down buttons to adjust the footrest.
Lumbar Support: Adjust lumbar support with the Lumbar Up and Lumbar Down buttons.
Tilt Function: Control the bed’s tilt using the Tilt Up and Tilt Down buttons.
Flat Button: Quickly return the bed to a flat position by pressing the Flat button.

These manual controls give you the flexibility to customize your bed position at any moment.

Saving and Recalling Memory Positions

One of the most convenient features of the Richmat HJH159 BLE remote is its ability to save up to five preset positions. This allows you to program your favorite comfort settings and recall them instantly.

How to Save a Preset Position

Adjust your bed to your preferred position using the manual controls.
Press and hold the FLAT button on the remote.
Within two seconds, press one of the preset buttons: M1, M2, TV, SNORE, or ZG.
The backlight will blink, and a buzzer will sound, confirming the position is saved.

How to Recall a Preset Position

Simply press the corresponding preset button to return the bed to your saved position.

Note: Preset positions are temporary and may be cleared if the power is interrupted.

Advanced Massage Functions

The Richmat HJH159 BLE remote also offers advanced massage features designed to promote relaxation and alleviate muscle tension.

How to Use Massage Controls

Activate Massager: Press and hold the Head Massager or Foot Massager button to start the massage function in the respective area.
Adjust Intensity: Tap the massage button repeatedly to cycle through different intensity levels.
Massage Modes: Press the Massage Mode button to switch between PULSE, WAVE, and CONSTANT modes.
Set Timer: Use the Massage Timer button to choose the duration of the massage session (10, 20, or 30 minutes).
The massage automatically shuts off when the timer ends.

These massage functions provide therapeutic benefits while helping users unwind after a long day.

Locking and Unlocking the Remote

To avoid accidental bed adjustments, the remote can be locked:

Lock: Press and hold the LOCK button for five seconds. The backlight will blink three times, indicating the remote is locked.
Unlock: Press and hold the LOCK button for five seconds again to unlock the remote.

While locked, all buttons except the flashlight remain inactive, providing peace of mind when the remote is not in use.

Resetting the Remote

If you experience issues or want to clear all settings and pairings, you can reset the remote:

Press and hold the Back Up and Foot Down buttons simultaneously for five seconds.
The flashlight will illuminate, and a buzzer will sound, confirming the reset.
Note that this will erase all saved positions and pairings.

After resetting, you’ll need to repeat the pairing process to reconnect the remote with your bed’s control box.

Troubleshooting Common Issues

Here are some helpful tips for common problems:

Remote Not Responding: Check battery status and replace if low. Wake the remote from sleep by pressing any button.
Pairing Fails: Ensure the control box is in pairing mode. Clear previous pairings and try again.
Buttons Unresponsive: Reset the remote and re-pair it.
Massage Functions Not Working: Verify massage motors are connected and functional; check for any obstructions.

Tips for Maximizing Your Richmat HJH159 BLE Experience

Avoid rapid or frequent button presses to prevent motor strain.
Store the remote in a safe, dry place to prevent damage.
Familiarize yourself with all buttons before use to prevent accidental commands.
Use preset positions to save time and avoid repeated manual adjustments.

Conclusion

The Richmat HJH159 BLE Wireless Remote Control is a powerful and user-friendly device that enhances your adjustable bed experience. Its Bluetooth connectivity, wide range of adjustable features, memory presets, and massage functions combine to offer superior comfort and convenience. By following this comprehensive guide, users can confidently set up, program, and operate their remote control, unlocking the full potential of their adjustable bed system.

Whether you’re seeking better sleep posture, pain relief, or simply want to relax with a massage, the Richmat HJH159 BLE remote makes it effortless.

If you need additional information or encounter complex issues, referring to the official user manual or contacting Richmat support is recommended.

Blog